Sales and Rental of Haulotte Personnel Lifts – 14m Working Height (12m Platform Height) in Vietnam

Model	QU13AC	QU13DC	QU14DC
Max Working Height (m)	13.7	13.7	13.7
Max Platform Height (m)	11.7	11.7	11.7
Safe Working Load (kg)	136	136	136
Machine Weight (kg)	455	497	497
Power Source	AC230V / Electric	DC12V / Battery	DC12V / Battery
Platform Size (m)	0.68 x 0.66	0.68 x 0.66	0.68 x 0.66
Stowed Length (m) C	1.47	1.47	1.47
Stowed Width (m) D	0.8	0.8	0.8
Stowed Height (m) A	1.98	1.98	1.98
Outrigger Width (m) I	2.34	2.34	2.34
Outrigger Length (m) H	2.70	2.70	2.70

Feature	Elevating Rolling Tower	Personnel Lift Quick Up series	Scissor Lift
Maximum Load	120~133 kg	136 kg	200–550 kg
Platform Area	Maximum 2 people	Usually fits only 1 person standing.	Usually fits up to 2 people plus materials.
Transportation	It can be transported using a box truck or van, and can be moved manually by just one person.	Transported by pickup truck or van; no mobile slope needed. Hand-pulled or pushed by 1 person.	They are usually transported by crane trucks or container trucks. Most cannot be moved by hand. (Except for scissor lifts with push-around mechanisms like the Airman ENHL series.) Assistance from ramps or forklifts is needed to load and unload them from vehicles.
Working Height	Maximum 6m	Up to 14m	It can reach up to 18m
Engine	Don’t have	Battery	Battery
Machine Weight	190~260 kg: Suitable for use on various surfaces.	455 kg / 497 kg – suitable for weak floor loads.	Over 1 ton – floor load capacity must be checked.
Size	Compact size – can pass through narrow pathways or fit into elevators.	Compact; can pass through narrow aisles or enter elevators.	Requires sufficient space; cannot be transported by elevator and must be craned.
Setup and Movement	Simple, by hand.	Quick setup and hand-movable.	Self-propelled; no setup needed.
Maintenance	Maintenance: Minimal breakdowns and simple servicing due to the absence of a drive motor.	Simple structure, less maintenance required.	Frequent inspection, replacement, and maintenance of parts are needed.

Aluminum Safe Platform Ladder for Rent in Vietnam (NISHIO Aluminum Platform Ladder)

目次Overview of NISHIO Aluminum Platform LadderVideo of NISHIO Aluminum Platform LadderSpecification of NISHIO Aluminum Platform LadderApplications of NISHIO Aluminum Platform LadderKey Features of NISHIO Aluminum Platform LadderWhy should NISHIO Aluminum Platform Ladder be used?Comparison between NISHIO Aluminum Platform Ladder and other regular laddersPricing for rental of NISHIO Aluminum Platform Ladder in Vietnam NISHIO Aluminum Platform Ladder is designed for working safely at medium heights. It is suitable for both fixed work areas or tasks that require moving between different locations. With a strong aluminum frame and safety handrails, this ladder ensures user safety and operational efficiency. Here is the video on how to install NISHIO Aluminum Platform Ladder: NISHIO Aluminum Platform Ladder model DAD-210EN(H) with 2m platform height is now available in NISHIO, ready to serve your needs at construction sites, factories, warehouses, indoor events, and various jobs in Vietnam. The specific specifications of this model are as follows. Model DAD-210EN(H) Load capacity 150 kg Platform height (H) 2.03 m Handrail height (H1) 1 m Total height (H + H1) 3.03 m Front base width (W1) 0.52 m Rear base width (W2) 0.96 m Deep (D1) 1.98 m Storage dimensions (H2 x W2 x D2) 2.54 x 0.96 x 0.32 m Weight 34 kg Picking or arranging items on shelves in warehouses, factories or logistics centers,… Inspecting, labeling or checking inventory,… in production areas. Ideal for indoor events, exhibitions and trade shows,… such as assembling booth frames, installing lighting, nameplates, banners, backdrops and other low-height decorations. Assist with construction-related tasks at the site, such as painting and repairing houses or apartments, and installing electrical and fire protection systems. Suitable for working at heights up to 3 meters, where users need to stand firmly and safely for a long period of time. Certified to European safety standard EN131. High-quality aluminum alloy frame: Lightweight, durable and rust-resistant – Suitable for warehouse and factory use. Easy-to-remove handrails allow flexible setup based on usage needs, as well as increasing operator safety when working. Smart foldable design: No complex assembly required, so users can begin work immediately after unfolding. This design also makes it easy to move between work areas and saves storage space when not in use. Note: Handrails must be removed before storage. Folded ladder deep now is only 32 cm. Equipped with 2 rear casters for easy movement when the ladder is lifted. During use, flat feet rest firmly on the ground for better stability. Spread stopper bracket assembly: Designed to reinforce the ladder frame when opened, preventing collapse or shifting during use. NISHIO Aluminum Platform Ladder model DAD-210EN(H) has a platform height of 2.03 meters, providing a working height of about 3.03 meters — ideal for safe and efficient work at height. Working at height can be dangerous and must follow safety regulations. According to Vietnamese law: Any task performed at a height of 2 meters or higher, on mobile platforms or in elevated positions is classified as requiring strict safety work. (Circular 13/2016/TT-BLĐTBXH) Employers and workers are legally required to follow safety control measures and use proper protective equipment. (Occupational Safety and Hygiene Law 2015) Required safety equipment includes: Safe ladders or scaffolding Fall protection harnesses Safety helmets Anti-slip safety footwear Other protective tools depending on the job For scaffolds over 2 meters in height, it is required to include: Safety guardrails Toe boards at work platforms, walkways and ladder steps (According to Circular 16/2021/TT-BXD) Please note that employers who fail to provide proper safety equipment can be fined from 20 to 25 million VND. (Decree 12/2022/NĐ-CP) To reduce the risk of workplace accidents, NISHIO Aluminum Platform Ladder is the ideal solution for various working environments, especially the following situations: Uneven or rough flooring: Traditional ladders placed on sloped or unstable surfaces can easily lose balance and tip over → NISHIO Aluminum Platform Ladder features flat and stable feet for better balance. Tasks requiring both hands or extended reach: Step ladders or A-frame ladders may not offer enough safety when users need to lean or stretch beyond the frame. Side-loaded tasks (like side-on drilling through wall): Force in one side can shift a regular ladder’s center of gravity, increasing the risk of slippage and causing accidents. Using makeshift or non-compliant scaffolding: Low-quality or improperly installed scaffolding can lead to serious workplace accidents. With the stable frame and removable safety handrail, NISHIO Aluminum Platform Ladder helps reduce the risk of accidents while still meeting workplace safety standards. Using low-quality ladders or using them in the wrong way can cause serious safety risks at work. Below is a real-life comparison between regular ladders and NISHIO Aluminum Platform Ladder when working at height: Feature Regular Ladder NISHIO Aluminum Platform Ladder Safety Lack of anti-slip feet Tend to slip or tip when climbing too high. Often require someone to hold the base. Equipped with anti-slip feet and a safety handrail set. Stable even when used alone. No need extra worker to hold the base. Durability and quality May rust, bend or break over time. (Compared to iron or steel ladders) Short lifespan, high risk of accidents after long-term use. Rust-resistant aluminum alloy for better durability. Strong locking mechanisms for safer usage. Built to last, with a sturdy frame for extended lifespan. Stability If the regular ladder is used incorrectly, such as stepping on the top rung with both feet and leaning forward, it is very easy to lose balance due to the lack of handrails or support points. Easy to slip or be unstable when placed on sloped, uneven or rough surfaces. Stable standing platform with a wide, solid work surface, ensuring a firm and safe standing posture. No need for any makeshift or uneven placement to support. Safe to use on various types of flooring. Worksite compatibility Often need to lean on walls or temporary setups, unsafe in many work environments. Require 2–3 people to hold the ladder for stability, wasting resources and increasing risk of accidents. Lack of wheels for mobility, must be carried or lifted manually when moving between locations. Specifically designed for working at height, such as electrical installation, system maintenance and interior construction. No need for extra person to hold the ladder – it stands independently. Equipped with wheels for easy movement between work areas and wheel locks for secure positioning when needed. Don’t wait until an accident happens to take safety seriously. Please prepare in advance to prevent risks and protect workers in every task at height! The rental price of NISHIO Aluminum Platform Ladder is based on your location and rental term. Please contact us for more information and receive the best pricing offer! Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO’s Contribution To The Construction Of Terminal 3 At Tan Son Nhat International Airport

Tan Son Nhat International Airport’s Terminal T3 was officially opened on April 19, 2025, after more than two years of construction, finishing ahead schedule about two months. This is a key national infrastructure project, marking a significant milestone in Vietnam’s aviation sector. The terminal began operation and serving passengers from the national holiday on April 30 – May 1, 2025, with many modern features such as a children’s play area, self-check-in counters, and advanced aviation technology. However, certain airlines are still adjusting their flight operations to the new terminal. Throughout the project, NISHIO contributed significantly to the on-time construstion progess and completion. We provided a wide range of high-quality equipment, ensuring both safety and operational efficiency at every stage. A Trusted Partner from Day One From the beginning of the project, NISHIO supplied various equipment to support construction, installation and finishing of key areas. Our machines not only helped contractors save time and effort, but also ensured absolute safety for all engineers and workers on-site. Key Areas Where NISHIO Contributed Foundation & structural phase: NISHIO provided PVC sheeting plates for safe and stable pathways, helping workers and transport vehicles move around the site right from the initial stages of construction. Steel structure installation: Our aerial work platforms enhanced safe and accurate for works at height. This sped up work on important areas like glass walls, connecting bridges, and entrances. Interior & infrastructure finishing: Forklifts, pallet trucks,… enabled smooth, efficient transportation and installation of interior materials and systems throughout the terminal. Commitment to Quality and Timely Delivery In addition to Terminal T3, NISHIO has proudly supplied equipment to other major airport projects including Noi Bai Airport, Long Thanh Airport, Phu Bai Airport,…With many years of experience in providing construction equipment for airport developments across Vietnam, we are committed to offering reliable solutions that keep projects on schedule, but still ensure safety and maintain quality. Thanks to our support, Terminal T3 was completed earlier than planned and started to welcome millions of passengers each year. The successful completion and launch of Terminal T3 presents the value of the strong collaboration between builders, contractors, and trusted partners like NISHIO, contributing to the sustainable development of Vietnam’s aviation infrastructure. NISHIO is always ready to support future development projects, providing safe, efficient, and optimized solutions for Vietnam’s most important construction works. We sincerely thank our valued clients for choosing us. We hope Terminal T3 will operate smoothly, safely, and leave a strong impression on both local and international travelers. If you need rental equipment, please leave your contact information on our website or call our hotline below. Explore our full range of rental equipment here. Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

NISHIO’s Equipment at the Long Thanh Airport Project

The Long Thanh International Airport project is the largest airport project ever undertaken in Vietnam, carrying significant importance for the socio-economic development of the Southeast region and the entire country. With its massive scale, the project has mobilized over 6,000 personnel and 2,200 machinery to ensure the construction process. In this project, NISHIO provides equipment rental services to contractors, including Aerial work platforms, forklifts, and other equipment. Notably, NISHIO takes pride in being the first equipment rental provider to supply Boom Lifts for this site. Additionally, all equipment provided by NISHIO undergoes regular maintenance, ensuring uninterrupted operation and minimizing risks during use. Our team of skilled mechanics is always ready to provide on-site support, helping customers meet their project deadlines. Contact NISHIO for consultation and support on optimal construction equipment solutions! Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

Sales and Rental of Haulotte Personnel Lifts QUICK UP– 14m Working Height (12m Platform Height) in Vietnam

Are you already familiar with scissor lifts? But have you heard of Haulotte’s Personnel Lifts?Scissor lifts are not always the most suitable option! Today, we are excited to introduce the Quick Up (Push-around) series – a personal aerial work platform from Haulotte, designed for single-person operation.It offers a working height of up to 14 meters! So, what are the advantages of this model, how is it operated, and where can it be applied?Let’s find out right now. 目次General introduction of the Personnel Lift Quick Up seriesAbout the Manufacturer – HaulotteAdvantages of the Personnel Lift Quick Up seriesSpecific Applications of the Personnel Lift Quick Up seriesSpecifications of the 14m Working Height Personnel Lift Quick Up seriesIntroduction and User Guide Video for the Personnel Lift Quick Up seriesComparison of Differences Between Personnel Lift Quick Up series, Elevating Rolling Tower, and Scissor LiftRental and Purchase Prices for Quickup 14m Personnel Lift in Vietnam Haulotte Group is a major French aerial work platform manufacturer, the third-largest company in the world in this area of products. For over 40 years, it has been the European leader in the design, manufacture, and sale of a wide range of products, the core of which is the aerial work platform. The Quick Up range of Push-arounds is adapted for all indoor projects. Push-around mechanism: The user can manually push the lift to the desired working location, then elevate the platform electrically. Lightweight: Operates on the most delicate floors. Easily moved by hand or loaded onto trucks and vans. Non-marking wheels and rubber stabilizers: Protect the floor in quality and appearance. Compact size: Can pass through doors and fit into elevators. Quick setup: Requires only one person. Low maintenance: Offers great value for money. With the above advantages, Quick Up is especially suitable for indoor work in confined or crowded areas such as supermarkets, retail stores, factories, warehouses, theaters, and auditoriums. Applicable tasks include: Installation of sound and lighting systems Signboard installation Inspection and maintenance of piping systems in factories High-level painting and mural work Interior decoration, etc. Currently, NISHIO has the Personnel Lift Quick Up series available in models QU13AC, QU13DC, and QU14DC. All models offer a working height of 14 meters (12 meters platform height). Other specifications are detailed in the table below. Model QU13AC QU13DC QU14DC Max Working Height (m) 13.7 13.7 13.7 Max Platform Height (m) 11.7 11.7 11.7 Safe Working Load (kg) 136 136 136 Machine Weight (kg) 455 497 497 Power Source AC230V / Electric DC12V / Battery DC12V / Battery Platform Size (m) 0.68 x 0.66 0.68 x 0.66 0.68 x 0.66 Stowed Length (m) C 1.47 1.47 1.47 Stowed Width (m) D 0.8 0.8 0.8 Stowed Height (m) A 1.98 1.98 1.98 Outrigger Width (m) I 2.34 2.34 2.34 Outrigger Length (m) H 2.70 2.70 2.70 Please watch the video below to get a clearer understanding of the Haulotte Personnel Lift Quick Up series and how to use it: Feature Elevating Rolling Tower Personnel Lift Quick Up series Scissor Lift Maximum Load 120~133 kg 136 kg 200–550 kg Platform Area Maximum 2 people Usually fits only 1 person standing. Usually fits up to 2 people plus materials. Transportation It can be transported using a box truck or van, and can be moved manually by just one person. Transported by pickup truck or van; no mobile slope needed. Hand-pulled or pushed by 1 person. They are usually transported by crane trucks or container trucks. Most cannot be moved by hand. (Except for scissor lifts with push-around mechanisms like the Airman ENHL series.) Assistance from ramps or forklifts is needed to load and unload them from vehicles. Working Height Maximum 6m Up to 14m It can reach up to 18m Engine Don’t have Battery Battery Machine Weight 190~260 kg: Suitable for use on various surfaces. 455 kg / 497 kg – suitable for weak floor loads. Over 1 ton – floor load capacity must be checked. Size Compact size – can pass through narrow pathways or fit into elevators. Compact; can pass through narrow aisles or enter elevators. Requires sufficient space; cannot be transported by elevator and must be craned. Setup and Movement Simple, by hand. Quick setup and hand-movable. Self-propelled; no setup needed. Maintenance Maintenance: Minimal breakdowns and simple servicing due to the absence of a drive motor. Simple structure, less maintenance required. Frequent inspection, replacement, and maintenance of parts are needed. Currently, NISHIO offers sales and rental of Haulotte Quickup 14m Personnel Lift in Vietnam, from short-term daily rentals to monthly and yearly leases. If interested, please contact us for consultation and an accurate quotation! Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

Spider Lift Rental in Vietnam

NISHIO has recently imported an additional model of Spider Boom Lift with Articulated Boom and Crawler Tracks, offering a working height of 23 meters, in order to meet the diverse needs of our customers in Vietnam. This Spider Lift is manufactured by CTE, a renowned European brand recognized worldwide for its top-tier reliability and quality. 目次Applications of Spider LiftsTechnical Specifications of CTE TRACCESS 230 (23m Spider Lift)Video introduction of the 23m Spider Lift Traccess 230Advantages of the 23m Spider Lift Traccess 230First Advantage: Flexibility with Dual Power Modes (Electric and Diesel)Second Advantage: Compact and Easy to ManeuverThird Advantage: Flexible Basket, Easy Access to Multiple PositionsFourth Advantage: Ideal Working Height and Platform CapacityFifth Advantage: Protection of Work SurfacesThe best Spider Lift Rental Service in Vietnam Spider Lifts are specifically designed for tasks in areas where conventional aerial work platforms cannot be used, such as passing through narrow entrances, working on weak flooring, or operating on uneven ground. Typical applications of Spider Lifts include: 1. Construction and Finishing Works Installation, construction, and maintenance of façades, glass panels, and aluminum-glass cladding. Interior works in large lobbies or shopping malls with high ceilings. Installation and maintenance of M&E systems (air ducts, HVAC systems, and fire protection piping). 2. Maintenance & Industrial Cleaning in factories, warehouses, sports arenas, stadiums, train stations, airports, and shopping centers Cleaning of ceilings, glass panels, and high walls. Maintenance of lighting systems, cameras, and sensors. 3. Power & Telecommunications Installation and maintenance of medium- and low-voltage power lines in residential areas or factories. Maintenance of lighthouses, lighting poles, streetlights, and outdoor billboards. Installation and repair of antennas, transmission equipment, and BTS telecommunication stations. 4. Greenery & Landscaping Pruning urban trees, park trees, and large old trees at elevated positions. Supporting landscaping works in urban areas, tourist sites, and resorts. 5. Specialized Works & Infrastructure Supporting maintenance works in tunnels, bridges, and transportation infrastructure. Applications in churches, pagodas, and cultural structures with tall and complex architecture. Assisting in rescue and emergency operations within confined spaces or hard-to-reach areas. 6. Film Production Support For aerial shots in locations with difficult terrain where wheeled boom lifts are not suitable, Crawler Spider Lifts can be used thanks to their stable movement, flexibility, and excellent balance. Manufacturer CTE Model TRACCESS 230 Maximum Working Height 23 m Maximum Platform Height 21 m Maximum Platform Capacity 200 kg Platform Dimensions (L × W × H) 1.3 × 0.7 × 1.1 m Machine Weight 2,900 kg » Articulated boom (two elements) + telescopic boom (main boom + 2 extension) + jib » Sigma boom articulation » 360° non continuous turret rotation on bearing turntable » Proportional electro-hydraulic controls in basket » Engine start and stop controls from basket » Aluminum basket available in single (2’6” x 2’3” x 3’7”) or double (4’3” x 2’3” x 3’7”) personnel sizes » 90° right + 90° left hydraulic basket rotation » Basket load sensing device » Wireless remote control » Dual drive with a maximum speed of 1.25 mph » Narrow outrigger configuration capability » Track width extends from 2’6” to 4’2” » 110V 2.2 kW electric auxiliary motor » Hydraulic basket auto-leveling » 4 hydraulic outriggers with ground pressure sensors » Hour meter » 110 V AC EC electrical socket in the basket » Standard boom colours blue (RAL 5017) or white (RAL 9003) » Meets new ANSI standards » Gradeability approximately 31% » Electro-hydraulic steering from the ground with radio control » 4 stabilization areas with hydraulic placement Engine » Kubota diesel engine Note: The values for outreach, maximum height, and repeatability can vary within ±3 % due to manufacturing variations and working conditions. Powered by an internal combustion engine (diesel) → suitable for outdoor applications where electricity is not available. Powered by electricity (110V plug-in) → ideal for indoor use where low emissions and noise are required. Crawler tracks allow the lift to move across rough and challenging terrains such as gravel or sandy areas. Four outriggers with four different positioning options (see video) enable operators to easily avoid ground obstacles. Outriggers can be retracted when moving through narrow spaces, allowing the lift to pass through doorways and restricted passages. The jib with a 10° working angle allows easy access to confined areas and helps overcome obstacles. The basket rotation of 90° + 90° (left and right) provides convenience for the operator. With a working height of up to 23 meters and a platform capacity of 200 kg, the Traccess 230 is suitable for a wide variety of both indoor and outdoor tasks. The Traccess 230 Spider Lift weighs only 2,900 kg — significantly lighter than most other boom lifts — making it highly suitable for projects on weak ground surfaces such as inside buildings or shopping malls. Extremely competitive rental rates for Spider Lifts. Spider Lift rental available from just one day. Delivery to all provinces and cities accross Vietnam upon customer request. All Spider Lifts are safety-checked before delivery. Complete with valid inspection certificates, insurance, and machine logbooks. Transparent and professional rental process: contracts with the company are accompanied by official invoices and handover reports. For monthly rentals → NISHIO’s technicians will provide scheduled maintenance, inspections, and on-site repairs whenever necessary. For customers interested in renting our Spider Lifts, please contact the hotline below or leave your contact information here for timely support. Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

Buy Used Aerial Work Platforms at a Good Price – Tips for Choosing Quality

If your budget is limited, or the frequency of use is low, purchasing a Used Aerial Work Platform (AWP) can be a smart choice. Many businesses have chosen to buy Used Aerial Work Platforms from NISHIO to reduce their initial investment costs. During our consultation process, we have identified the common concerns that customers often face when considering the purchase of a used Aerial Work Platform, such as: Concerns about equipment quality. Concerns about documents and origin. Concerns about the warranty policy. Concerns about pricing. Uncertainty about which type of machine best fits their actual needs. Through this article, we will provide clear explanations and detailed advice regarding Used Aerial Work Platforms for your reference. 目次Key Factors Affecting the Price of Used Aerial Work PlatformsTrusted Aerial Work Platform Brands to Consider When Buying UsedUsed JLG Aerial Work PlatformsUsed Genie Aerial Work PlatformsUsed Skyjack Aerial Work PlatformsUsed Haulotte Aerial Work PlatformsUsed Dingli & LGMG Aerial Work PlatformsHow to Check if a Used Aerial Work Platform Is Still in Good Condition (Applicable to All Types of AWPs)Document InspectionCheck Working HoursCheck Maintenance and Repair HistoryCheck the Hydraulic SystemCheck the Mechanical ComponentsChassis and BodyPlatform and GuardrailsSteps/LadderAxle AssemblyWheelsCheck the Electrical SystemControl PanelEmergency Lowering ButtonBrake System InspectionExternal CheckDetailed CheckOperational TestCheck the Diesel Engine (For Diesel-Powered Lifts)Check the Battery (For Electric-Powered Lifts)Where to Buy Used Aerial Work Platforms?Why Should You Buy Used Aerial Work Platforms from NISHIO?List and Prices of Used Aerial Work Platforms Available at NISHIO Just like other vehicles in the used-equipment market, the price of a Used Aerial Work Platform (AWP) depends on several factors, such as: Brand, model, and year of manufacture. Technology and features of the equipment. Exterior and interior condition. Actual performance capacity. Documentation and ownership papers. And one factor that buyers often overlook: the reputation of the seller. Based on these factors, sellers will offer different price levels, and buyers can compare to make a decision that best fits their budget. The market is filled with numerous Aerial Work Platform (AWP) brands, which often makes it difficult for customers to decide. With nearly 60 years of experience in this industry, we are confident in recommending some of the most reputable and well-known brands for your consideration. (You can also refer to the 2023 Global Aerial Work Platform Manufacturers Ranking published by RQ-Parts.) JLG is a leading U.S.-based designer and manufacturer of aerial work equipment. Since 1969, JLG has continuously innovated its products and services, delivering safe and efficient solutions to customers worldwide. Today, JLG is recognized as one of the best Aerial Work Platform manufacturers in the market. This company has applied advanced and proprietary technologies such as the SkyGuard safety system to ensure maximum operator protection, and ClearSky Smart Fleet™ – the industry’s first two-way fleet management and communication platform – enabling more effective connectivity and interaction. By choosing JLG, customers can trust in long-lasting quality while enjoying access to the latest cutting-edge technologies in aerial work equipment. Securing an authentic used JLG machine is truly a decision you won’t regret. Genie is another leading U.S.-based manufacturer of aerial work equipment, and it is also the most popular brand in the Vietnamese market. One of the key reasons is Genie’s early presence in Vietnam during the country’s period of rapid economic growth and major construction development. Genie lifts can be found almost everywhere and have truly earned the trust and recognition of users. As a result, Used Genie Aerial Work Platforms are also widely available for purchase. Skyjack, a Canadian brand, is proudly ranked among the world’s Top 3 Aerial Work Platform manufacturers. Renowned for their quality and reliability, Skyjack Scissor Lifts have earned one of the strongest reputations in the industry. In fact, one out of every three scissor lifts sold worldwide is a Skyjack. Haulotte is a well-established brand from France. For more than 40 years, the company has been a European leader in the design, manufacturing, and sales of a wide range of products, with a strong focus on aerial work equipment as its core business. Dingli and LGMG are well-known Chinese Aerial Work Platform brands. In recent years, both companies have quickly entered the Vietnamese market by expanding their dealer networks and offering attractive pricing. We evaluate the aerial work equipment from these two brands as basic-level products that match their price points, making them a reasonable option for users who do not have very strict requirements. However, caution is advised: since the technology is not particularly distinctive, “copycat” machines may also appear on the market. An Aerial Work Platform (AWP) is one of the most safety-critical pieces of equipment used in construction and installation work. Therefore, one of the biggest concerns for buyers is how to determine whether a used AWP is still in good enough condition to be safely operated. The types of documents that need to be fully and legally verified are: Import documents Certificate of Origin (CO) Certificate of Quality (CQ) Safety Inspection Certificate Insurance This is probably the first thing that vehicle buyers will think of. The operating hour meter can indicate the level of usage. However, caution is needed because a low number of operating hours may be the result of tampering. Large and professional companies usually keep detailed records of vehicle maintenance. This is a big advantage, as it helps determine whether the vehicle has been regularly cared for or not. As the saying goes, “what’s inside matters more than the outside.” While the exterior does not necessarily need to look perfect—since scratches and faded paint are unavoidable—the key components of the machine must be properly maintained, repaired, or even replaced on a regular basis to prevent dangerous incidents. Below are the essential parts that must be carefully inspected when choosing a Used Aerial Work Platform. The hydraulic system of an Aerial Work Platform operates using hydraulic oil, which is not consumed during operation. Therefore, it is essential to check whether there are any hydraulic oil leaks and to ensure that the oil level and condition are sufficient for the system to function effectively. Damaged mechanical parts can also pose serious risks during operation. Some of the key areas that need to be inspected include: If the chassis or body is dented, bent, or deformed, it may cause the machine to tilt and lose balance. If the working platform or guardrails are unstable, cracked, deformed, loose, or broken, it poses a serious safety risk for operators working at height. It is essential to ensure that the steps (ladder) are stable and intact, so operators can safely climb on and off the lift without the risk of slipping or missing a step. This section must be thoroughly inspected, checking each bolt carefully to ensure there are no risks of serious incidents such as the lift collapsing or tipping over unexpectedly. Inspect the wheels for excessive wear or cracks. If they are severely damaged, they must be replaced to avoid compromising both performance and safety. Make sure that all electrical operations are functioning properly. For example: The control panel is one of the most critical components, directly affecting the operation of the lift. Test it multiple times to check for any issues, such as: Does the lift respond immediately after pressing the control button, or is there a delay? Are the buttons difficult to operate? The emergency lowering button is located on the left-hand side, below the platform, at the rear of the lift. Raise the platform, then firmly pull the emergency lowering button to check if the lift automatically descends. Before Inspection: Turn off the power (switch off the key, disconnect the battery if necessary). Chock the wheels to prevent the vehicle from rolling. Prepare tools: wrench, oil pressure gauge (for hydraulic brakes), flashlight, and cleaning cloth. Wear protective gear. Visually inspect the entire brake system, including: pedal, brake lever, cables, oil lines, or electrical wires (for electric brakes). Check for oil leakage at brake lines and cylinders. Examine joints, bolts, and pins for any damage. Step on the pedal to feel the travel (it should not be too deep or too stiff). Listen for unusual noises such as sticking or grinding. Check the brake fluid level in the reservoir (must be within MIN–MAX limits). Observe the fluid color: if it is black or contains residue, replacement is needed. Inspect brake hoses for swelling or cracks. Remove and check brake pads: wear must remain above the limit (usually ≥ 2–3 mm). Brake discs or drums must not be cracked or scorched. Check that wires and connectors are not oxidized or broken. Ensure the electric brake coil operates stably. Start the vehicle and test at low speed. Apply the brakes to stop the vehicle and check: The vehicle must stop firmly without extended sliding. No loud noise during braking. Test the emergency brake (if equipped). If any abnormalities are found (e.g., worn brake pads, oil leaks, faulty electric brake coil), consider repair or look for another vehicle. The diesel engine (internal combustion engine) is like the “heart” of an Aerial Work Platform that uses diesel. For this component, start the machine and check the following details: Does the engine emit excessive smoke? Is the power output sufficient? What is the heat level? Does the engine overheat? Are there any oil or fluid leaks? If any of these issues occur, then the lift you are considering is certainly not a reliable choice. Just like the diesel engine, the battery is the core component of an Electric Aerial Work Platform. Steps to check the battery of an AWP: External condition: The battery should not be swollen or cracked. The terminals must be intact and free from oxidation. For wet-cell batteries: Ensure there is sufficient electrolyte water, and that it is not depleted or cloudy. For maintenance-free (dry-cell) batteries: The battery indicator (often called the “eye”) must show a good condition. Load test: Perform a discharge test under load to check whether the battery experiences a deep voltage drop, which will help determine its actual condition. Most types of Aerial Work Platforms usually come with a maintenance manual – it is recommended to cross-check with it to ensure that inspections are carried out according to the proper standards. When looking to purchase a used Aerial Work Platform (AWP), buyers can consider several options: Companies specializing in buying and selling used machinery and equipment in Vietnam– When purchasing from these companies, it is important to carefully check the origin and quality of the machines. Many of these lifts were manufactured a long time ago, have not been properly maintained, and often lack regular replacement of parts while being stored in open yards for years. Some are even imported from overseas (commonly from countries like Japan), where they are no longer usable, and then resold in Vietnam. These units often do not meet safety standards. Equipment resold by companies in Vietnam that no longer need to use them– This is considered the safest and least risky option. Since these lifts are typically used by companies for projects, factories, or construction sites, they are regularly inspected to ensure safety. Such machines usually come with complete documentation, and transactions are straightforward and efficient. Importing used equipment from overseas– This method can be complicated and risky, as it requires extensive paperwork, international payment, and logistics, while buyers cannot directly meet the seller or inspect the machine in person. Without prior experience in international trade, this option is generally not recommended. When it comes to aerial work equipment in Vietnam, NISHIO is a name that cannot be overlooked. As one of Japan’s leading companies specializing in machinery and equipment rental services worldwide, we have built a strong reputation for reliability and quality. While we primarily focus on renting and selling new equipment, we also offer used machines for sale whenever we upgrade our fleet with the latest models. Reasons to Buy Used Aerial Work Platforms from NISHIO: We are an authorized dealer of JLG, Skyjack, and Haulotte, and a strategic partner of Genie. This means all of our machines are purchased directly from the manufacturers, with complete documentation and verified origin. The used lifts we sell are the very same units from our rental fleet. Each machine is still in good working condition and fully qualified for use on projects of all sizes across the country. They are regularly maintained and fitted with genuine parts by our team of highly skilled technicians. When you buy from us, you will also receive thorough consultation and support from our professional sales and technical teams. With NISHIO, you never have to worry about the quality of your equipment—we guarantee safety and peace of mind in every operation. We are pleased to share the list of Aerial Work Platforms that NISHIO is currently offering for resale, for your reference below: Name Brand Model Specification Year of manufacture Personnel Lift Genie AWP40 Max. Working height: 14,3 (m) Max. Platform capacity: 136 (kg) 2014 Telescopic Boom Lift Skyjack SJ12 Max. Working height: 5,65 (m) Max. Platform capacity: 227 (kg) 2011 Scissor Lift Genie GS1930 Max. Working height: 7,79 (m) Max. Platform capacity: 227 (kg) 2013 Scissor Lift Skyjack SJ3219 Max. Working height: 7,79 (m) Max. Platform capacity: 227 (kg) 2014/2015 Scissor Lift Genie GS2646 Max. Working height: 9,80 (m) Max. Platform capacity: 454 (kg) 2014 Scissor Lift Genie GS3246 Max. Working height: 11,75 (m) Max. Platform capacity: 318 (kg) 2013 Scissor Lift Genie GS4047 Max. Working height: 13,94 (m) Max. Platform capacity: 350 (kg) 2014/2015 Scissor Lift Genie GS5390 Max. Working height: 18,15 (m) Max. Platform capacity: 680 (kg) 2007 Articulating Boom Lift Genie Z34/22 Max. Working height: 12,54 (m) Max. Platform capacity: 227 (kg) 2010/2011 Articulating Boom Lift Genie Z45/25 Max. Working height: 25,86 (m) Max. Platform capacity: 227 (kg) 2011/2012 Articulating Boom Lift Genie Z60/34 Max. Working height: 20,39 (m) Max. Platform capacity: 227 (kg) 2006/2007 Articulating Boom Lift Genie Z80/60 Max. Working height: 25,77 (m) Max. Platform capacity: 227 (kg) 2007 Telescopic Boom Lift Genie S65 Max. Working height: 21,81 (m) Tải trọng tối đa: 227 (kg) 2004 Telescopic Boom Lift Genie S80 Max. Working height: 26,38 (m) Max. Platform capacity: 227 (kg) 2005 Telescopic Boom Lift Genie S85 Max. Working height: 27,90 (m) Max. Platform capacity: 227 (kg) 2005/2006/2008 Telescopic Boom Lift Genie S125 Max. Working height: 40,15 (m) Max. Platform capacity: 227 (kg) 2003 Don’t hesitate to contact NISHIO if you are looking to purchase a Used Aerial Work Platform.We will provide you with detailed consultation so you can choose the exact type of lift that best fits your needs. You are welcome to visit any of our branches nationwide to inspect the actual condition of the machines. We guarantee genuine, high-quality equipment only. Call our Hotline below or simply send us your information here! Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

Sales and Rental of Haulotte Personnel Lifts QUICK UP– 14m Working Height (12m Platform Height) in Vietnam

Are you already familiar with scissor lifts? But have you heard of Haulotte’s Personnel Lifts?Scissor lifts are not always the most suitable option! Today, we are excited to introduce the Quick Up (Push-around) series – a personal aerial work platform from Haulotte, designed for single-person operation.It offers a working height of up to 14 meters! So, what are the advantages of this model, how is it operated, and where can it be applied?Let’s find out right now. 目次General introduction of the Personnel Lift Quick Up seriesAbout the Manufacturer – HaulotteAdvantages of the Personnel Lift Quick Up seriesSpecific Applications of the Personnel Lift Quick Up seriesSpecifications of the 14m Working Height Personnel Lift Quick Up seriesIntroduction and User Guide Video for the Personnel Lift Quick Up seriesComparison of Differences Between Personnel Lift Quick Up series, Elevating Rolling Tower, and Scissor LiftRental and Purchase Prices for Quickup 14m Personnel Lift in Vietnam Haulotte Group is a major French aerial work platform manufacturer, the third-largest company in the world in this area of products. For over 40 years, it has been the European leader in the design, manufacture, and sale of a wide range of products, the core of which is the aerial work platform. The Quick Up range of Push-arounds is adapted for all indoor projects. Push-around mechanism: The user can manually push the lift to the desired working location, then elevate the platform electrically. Lightweight: Operates on the most delicate floors. Easily moved by hand or loaded onto trucks and vans. Non-marking wheels and rubber stabilizers: Protect the floor in quality and appearance. Compact size: Can pass through doors and fit into elevators. Quick setup: Requires only one person. Low maintenance: Offers great value for money. With the above advantages, Quick Up is especially suitable for indoor work in confined or crowded areas such as supermarkets, retail stores, factories, warehouses, theaters, and auditoriums. Applicable tasks include: Installation of sound and lighting systems Signboard installation Inspection and maintenance of piping systems in factories High-level painting and mural work Interior decoration, etc. Currently, NISHIO has the Personnel Lift Quick Up series available in models QU13AC, QU13DC, and QU14DC. All models offer a working height of 14 meters (12 meters platform height). Other specifications are detailed in the table below. Model QU13AC QU13DC QU14DC Max Working Height (m) 13.7 13.7 13.7 Max Platform Height (m) 11.7 11.7 11.7 Safe Working Load (kg) 136 136 136 Machine Weight (kg) 455 497 497 Power Source AC230V / Electric DC12V / Battery DC12V / Battery Platform Size (m) 0.68 x 0.66 0.68 x 0.66 0.68 x 0.66 Stowed Length (m) C 1.47 1.47 1.47 Stowed Width (m) D 0.8 0.8 0.8 Stowed Height (m) A 1.98 1.98 1.98 Outrigger Width (m) I 2.34 2.34 2.34 Outrigger Length (m) H 2.70 2.70 2.70 Please watch the video below to get a clearer understanding of the Haulotte Personnel Lift Quick Up series and how to use it: Feature Elevating Rolling Tower Personnel Lift Quick Up series Scissor Lift Maximum Load 120~133 kg 136 kg 200–550 kg Platform Area Maximum 2 people Usually fits only 1 person standing. Usually fits up to 2 people plus materials. Transportation It can be transported using a box truck or van, and can be moved manually by just one person. Transported by pickup truck or van; no mobile slope needed. Hand-pulled or pushed by 1 person. They are usually transported by crane trucks or container trucks. Most cannot be moved by hand. (Except for scissor lifts with push-around mechanisms like the Airman ENHL series.) Assistance from ramps or forklifts is needed to load and unload them from vehicles. Working Height Maximum 6m Up to 14m It can reach up to 18m Engine Don’t have Battery Battery Machine Weight 190~260 kg: Suitable for use on various surfaces. 455 kg / 497 kg – suitable for weak floor loads. Over 1 ton – floor load capacity must be checked. Size Compact size – can pass through narrow pathways or fit into elevators. Compact; can pass through narrow aisles or enter elevators. Requires sufficient space; cannot be transported by elevator and must be craned. Setup and Movement Simple, by hand. Quick setup and hand-movable. Self-propelled; no setup needed. Maintenance Maintenance: Minimal breakdowns and simple servicing due to the absence of a drive motor. Simple structure, less maintenance required. Frequent inspection, replacement, and maintenance of parts are needed. Currently, NISHIO offers sales and rental of Haulotte Quickup 14m Personnel Lift in Vietnam, from short-term daily rentals to monthly and yearly leases. If interested, please contact us for consultation and an accurate quotation! Submit Rating / 5. Vote count: No votes so far! Be the first to rate this post.

News

Sales and Rental of Haulotte Personnel Lifts QUICK UP– 14m Working Height (12m Platform Height) in Vietnam

General introduction of the Personnel Lift Quick Up series

About the Manufacturer – Haulotte

Advantages of the Personnel Lift Quick Up series

Specific Applications of the Personnel Lift Quick Up series

Specifications of the 14m Working Height Personnel Lift Quick Up series

Introduction and User Guide Video for the Personnel Lift Quick Up series

Comparison of Differences Between Personnel Lift Quick Up series, Elevating Rolling Tower, and Scissor Lift

Rental and Purchase Prices for Quickup 14m Personnel Lift in Vietnam

Contact

Aluminum Safe Platform Ladder for Rent in Vietnam (NISHIO Aluminum Platform Ladder)

NISHIO’s Contribution To The Construction Of Terminal 3 At Tan Son Nhat International Airport

NISHIO’s Equipment at the Long Thanh Airport Project

Sales and Rental of Haulotte Personnel Lifts QUICK UP– 14m Working Height (12m Platform Height) in Vietnam

Spider Lift Rental in Vietnam

Buy Used Aerial Work Platforms at a Good Price – Tips for Choosing Quality

Sales and Rental of Haulotte Personnel Lifts QUICK UP– 14m Working Height (12m Platform Height) in Vietnam